广东省中山市宝驰汽车保修检测设备有限公司-|烤漆房|涂装|宝中宝烤漆房|淋雨检测线|喷漆烤漆房|举升机|调漆室
    Automotive spraying/baking booth
    BC768(oil&electricity&gas) Automotive spraying/baking booth
    BC-738S Automotive water spraying/baking booth
    BC-Y70/40 Automotive spraying/baking booth
    BC-728 Automotive spraying/baking booth
    BC-718 Automotive spraying/baking
    Main configuration
    Automotive preparation station
    BC-580 Automotive preparation
    BC-560 Automotive preparation
    The bus spray / paint room series
    Bus BC-K15 spray / paint room
    Industrial Painting Series
    Painting Model Project
Address:No.95,second Road of Tanbei
                     west,Zhongshan City,
                    Guangdong Province
Zip:528412
Tel:+86-760-88505858
                           88502001
                           88507706
Fax:+86-760-88502006
Web:http://www.zs-baochi.com
E-mail:bc@zs-baochi.com
Configuration  
1、Hot-air Recycling System
By recycled heating of fresh air, it can increase the temperature from 20℃ to 60℃ for only 5 to 6 minutes, which can save the energy, make the quantity of heated air be high in an unit volume and distribute evenly, thus ensure the constancy of temperature in the room. With many kinds of paint mist filter devices and absorbing systems, it can ensure the exhausted air to reach the national standard.
2、External Motor Centrifugal F Class insulated Blower Fan manufactured by Siemens Technology
It is low noise. With a big air flow, it can ensure that the average speed of air flow in the room is about 0.35m/s, thus satisfying the formation requirements of the paint film and improving the utilization of paint. Meanwhile, it meets the requirements of air cleanliness, thus to confirm the health of operators. Besides, the positive pressure in the room can effectively prevent dust from permeating into the room, which can confirm the spraying quality.
3、Safety Device for Air Overpressure
It can ensure that the door of the baking room can be automatically opened to relieve the pressure when the pressure inside becomes too high, thus to ensure the safety of operators.
4、The Main Door Hinge
It is made of thick cast steel to avoid its droop in a long-tem use. And it is not easy to break. Meanwhile, it is reliable and looks nice.
5、Original Italian RIELLO Burner
By using the light oil burner, it can improve the utilization factor of energy greatly, and ensure the environment be friendly. The heat exchanger, together with it, is welded by a stainless steel plate, which is high quality and high temperature resistance. And the heat exchanging efficiency can reach up to 85%. It characterizes with a big heat exchanging area, sufficient combustion and high efficiency, safety and reliability.
6、Original BELIMO Automatic Damper imported from Swiss
It ensures that the transition between the internal and external cycle is accurate and smooth. And it has a long heat preserving time and can save oil and power.
7、Control Box -- Control Center of Booth
All the operation and control elements contained it are all selected famous band produced from home and abroad. With extremely high quality, and elaborate design, the performance of the whole system is stable, reliable and more convenient to serve you correctly in time. Each control state can be set accurately, of which the program control equipments can display the temperature and drying time of the room clearly. The advanced thing is that the spraying and baking can be done automatically in a constant temperature under different conditions, which can be set completely at a time.
8、Basement Combination
It has a big galvanizing steel bracket structure which is high strength, endurable and nice. It is not limited by places for it can placed flexibly in left, right, or rear side. Thus it can provide customers with a long term return with only one investment.。
9、Lighting System
In order to allow operators to work in a shadowless condition, it uses a famous lighting tube and special electronic ballast designed for the baking room by specialists. And the luminance can reach up to 800Lux.
10、Air Filter System with an Unique and Big Area
The whole system is designed by the international advanced technology. And the core part, filter cotton, is specially produced by customization in Italy. It can allow the room air be filtered evenly and purified, and ensure the wind speed and air pressure in the best condition during the operating process, thus to create a clean working environment.
11、Wall Board
Thickness: 60mm, insulating material with color EPS, suitable for ordinary spraying booth
Thickness: 60mm/70mm, insulating material with mineral wool, suitable for heating spraying booth.
Thickness: 60mm/70mm, insulating material with polyurethane, suitable for industrial spraying line.
12, heat lamp system
High efficiency of drying paint, in addition to swing down design, your use of the process will be more handy.
广东省中山市宝驰汽车保修检测设备有限公司-|烤漆房|涂装|宝中宝烤漆房|淋雨检测线|喷漆烤漆房|举升机|调漆室

Copyright©2009 ZS-BAOCHI.com, All Rights Reserved ©Zhongshan Baochi Automobile Maintenance and Testing Equipment Co.Ltd
Address: No.95,second Road of Tanbei west,Zhongshan City,Guangdong Province
TEL: +86-760-88505858 88502001 88507706  FAX: +86-760-88502006   E-mail: bc@zs-baochi.com  http://www.zs-baochi.com